DeboraHarry 发表于 2012-6-3 00:00:00 HFSS: How can I get Optimetics to use all CPUs I'm doing an optimetrics analysis in HFSS and want to look at 10 different lengths for a parameter. Download Animation Preset After Effect. Given I have 8 CPUs, and I believe a license which allows these to be used, I'm puzzled that HFSS is doing these serially, not in parallel.

The license says at the top, so I believe the HPC pack license should work, enabling the multiple CPUs on the machine, but perhaps I am wrong. Code: # Products licensed in this file:# 1. Ansoft Full-Wave SPICE (For HFSS): 1 license(s), LEASE expiring 20-Nov-2012.# 2. Ansoft HFSS: 1 license(s), LEASE expiring 20-Nov-2012.# 3. Ansoft HFSS-IE Solver: 1 license(s), LEASE expiring 20-Nov-2012.# 4.

Ansoft HFSS/Q3D HPC Pack: 1 license(s), LEASE expiring 20-Nov-2012.# 5. Ansoft Optimetrics (For HFSS, Q3D Extractor, Maxwell): 1 license(s), LEASE expiring 20-Nov-2012.# 6. AnsoftLinks - for MCAD (Enables IGES, STEP and Pro/E import): 1 license(s), LEASE expiring 20-Nov-2012. I've set the parameters for the solver (Tools ->Options ->HFSS Options, then the advanced tab), as below. Is there anything else I need to set? Downebd/653.png The license server is the same as the local host - i.e.

Failed to check out 'hfss Flexlm complete error codes. No TCP/IP port number in license file and FLEXlm. The lookup for the host name on the SERVER line in the license file failed. Drivers Tested To Comply With Fcc Standards And Practices. Feature: compiler. Expire date: 3. License path: C: license. Net Licensing error: -1. For further information, refer to the Flex.

I'm not using a remote server for a license. There are no errors when HFSS starts to indicate it can't use the multiple processors. This is on Linux - not Windows, although I doubt that makes any difference. Healthpointe 2 0 Program Management here.

I've seen similar issues on Windows. Any ideas how I can speed things up?

/ Licensing User's Guide Licensing Errors The following errors may occur during product licensing or product use. They appear: • In the License Management dialog, • In the Output Window when starting the Debugger, • or In the Output Window as a WARNING generated by the Compiler, Assembler, or Linker/Locater. General Error Messages • R200: RENEW LICENSE ID CODE (LIC) R201: INVALID LICENSE ID CODE (LIC) The CID of your computer has changed (typically this happens when you update the operating system). Your current LIC and (so that license is returned to the pool) and. • R202: LICENSE TIMEOUT The computer time is invalid. Check the time setting on your computer and make sure that the clock is working.

• R203: EVALUATION PERIOD EXPIRED Your license has a time limit that is now expired. Please contact the or your local Keil Software Distributor. • R204: LICENSE ERROR R205: PARAMETER ERROR Internal Error, contact. • R206: NO REGISTRY ACCESS, ADMINISTRATION RIGHTS REQUIRED You have no access to the registry of your computer. Please log in with administration rights or change the rights of the current user to administration rights.

• R207: REGISTRY READ ERROR Internal Error, contact. • R208: RENEW LICENSE ID CODE (LIC) During software registration some computer parameters have changed. Make sure that you are using the same network configuration and do not change the network adapter (or reconfigure other hardware parameters) until you have added the LIC in the License Management dialog. This error can occur if: • Your LIC has been modified since it was generated. Did you incorrectly copy it? • Some of the computer parameters have changed since you generated your LIC. Solution: • Make sure you correctly copied your LIC, or • Uninstall this LIC and click the ‘Get LIC via Internet’ button to obtain a new LIC for this computer.