Patterns for longitudinal pavement lines. Typical raised pavement marker placement with longitudinal pavement markings. Lines that travel along the road (longitudinal) inform and warn drivers of approaching situations that will need them to do something - like turn right, or do not cross. Areas with white diagonal stripes. What Do Diagonal Lines On The Pavement Warn Drivers Of ROAD MARKINGS - Nigeria Highway Code. ROAD MARKINGS. Ideally these are reflective so that you may clearly and safely follow the roads even at night.

Download Lagu Daerah Dayak Kalimantan Barat here. There are two types of No Passing Lines, they are *Single Lines-These single,solid yellow lines on two-lane roads indicate zones where passing is prohibited. They will be located on the right of the broken yellow line when they apply to the lane in which you are traveling. In some instances, both yellow lines will be solid, indicating that it is not safe for passing in either direction. *Double Lines- Double white lines are pavement markings on roadways that indiicate where vehicles can or cannot cross to access the adjacent lane. When the double white lines are solid, lane changes are prohibitied.

These are the white dashes that mark the individual lane of travel on streets and highways having more than one lane for traffic moving in the same direction. When there are four or more lanes with traffic moving in opposite directions, two soild yellow lines mark the center of the roadway. You may cross these lines only to make a left turn into or from an aley, private road, driveway, or another street. When traveling on a multi-lane road, stay in the right lane except to pass other vehicles traveling in the same direction.

These lanes, bordered by solid yellow and/or broken yellow lines, is in the center of many streets and highways to make left turns. A motorist desiring to turn left should proceed to the turn lane just prior to making a left turn.

Georgia law prohibits the use of this lane for any purpose other than making a left turn. You may enter this lane no more than 300 feet from the location of the left turn. When a turning lane is provided for vehicles traveling in both directions, you should use extreme caution before entering the turning lane to make a left turn. There may be a vehicle traveling in the opposite direction also entering the turning lane to make a left turn. This is especially problematic in congested areas.

These are solid white lines typically located between the farthest right traffic lane and the curb or edge of the roadway. If there is a right-turn-only lane present, the bicycle lane will be located to the left of the right-turn-only lane in order to safely accommodate bicycles traveling straight through the intersection. Bicycle lanes may also be marked with painted symbols of a bicycle. Drivers of motor vehicles are prohibited from driving or parking in the bicycle lane, except to cross over it to make a turn. When crossing over a bicycle lane to make a turn, motorists must yield to bicyclists that are present. Roundabouts are sometimes used at intersections instead of stop signs. The purpose of a roundabout is to allow the intersection to handle heavier traffic flow without the need for a signal or a four-way stop.

When entering a roundabout, traffic laws concerning right-of-way still apply. You must yield to other traffic that is already in the roundabout.

You will always enter a roundabout to the right, and continue circling until you have reached the roadway onto which you want to turn. When reaching the desired road, you will always exit to the right.