You use a RS232 cable, one end plug into the serial or config port of the NetApp controller, the other end plug into the serial port on your computer or laptop. These days, most laptops don't come with a serial port any more. Microsoft Access 2010 Free Download Full Version For Windows 7 here. In this case, then you need a USB to searial port converter (it's an adapter with a CD with some software you need to install). Once you have the cable hooked up, use Hyper Terminal (comes with Windows), and configure the session (select the right COM port, set baud rate, etc.) Once that's done, you should see a NetApp controller interface inside the hyperterm and you can configure the controller from there.

Radio 2.12 50 Hd2 Download. If you have not done this before, probably it's a good idea to ask someone to help. Alternatively, you may still have telnet access to the NetApp controller.

Pointers In C By Yashwant Kanetkar Ebook Reader here. App Support Community. This is only needed if you plan to use serial console to enter BIOS configuration utility or observe early startup messages even before. You can access the storage system directly from a console that is attached to the serial port by a cable. Dec 18, 2014 - Re: FAS2040 Console Port. 2014-12-18 12:57 PM. The console port is just that. For serial console connection to a physical computer. The FAS2040 does have an out-of-band management port called the BMC. This port has a wrench and is for SSH connectivity and out-of-band management of the unit to. App Support Community. This is only needed if you plan to use serial console to enter BIOS configuration utility or observe early startup messages even before.

I think the disabling of http only disables the GUI. If so, then it's easier than using the RS232. Please let me know if you can access the controller via telnet.